Fiat 500 Key Fob Replacement
If your 500 key fob stops working, try using another one to see if your car will detect it. If it does, it could be a problem with the battery or water damage to the original fob.
Replace the battery first. The "+" side should be facing down.
Dead Battery
Most of the time when a fob won't work, it's just because the battery is dying. It's easy to fix, and most fobs warn you when the battery is running low. You can find the correct procedure for most car key fobs on YouTube or in the owner's manual. You can also take it to a local locksmith or to the dealer that provided it to you to replace it.
Sometimes a fob will stop working due to a glitch in the internal circuit board. It is rare, but it does happen. The internal chip may be damaged in the event that you drop the fob onto something that is hard. It can also happen if you are using an aftermarket fob, and the key doesn't work. In this instance you'll need to go to an authorized locksmith or dealer and have it reprogrammed to work with your 500.
One 2012 FIAT FIAT 500 flip key remote – Looks like Ilco with locks, unlocks and trunk buttons - new replacement keyless entry (will require cutting and program by a locksmith).
Chip Damaged
A key fob with the fiat 500 number is an wireless device that sends the signal needed for the car to start once you press the button. It is equipped with a microchip that contains information about the code required to communicate with the car. If the chip is damaged, it will not transmit the correct code, and the car won't start. It's possible to repair this kind of damage and a locksmith will assist. United Locksmith is capable of completing this service for classic models as well as newer ones, so don't hesitate to call them. afraid to call them.
You can buy a new fob and have it professionally programmed by a locksmith. It is cheaper to do this instead of going to a dealer and it works the same way. Locksmiths will require specific details from you, such as the year your car was manufactured as well as the model's name.
If you're not sure how to solve this issue Try scratching the chip with a US dollar bill. The copper in the bill is abrasive, and can remove oxidation and dirt. However, it will not harm the microchip. If the chip is physically damaged, it might not be able to be repaired. This can happen when you drop the chip or run it over by your vehicle.
Water Damage
Water damage is likely to occur on your fob, no matter if you dropped them in the pool accidentally, left them in a pocket while swimming or splashed water on them in a rainy afternoon. Even if there's only a little water on the keys, this could cause serious problems to the electronics inside and stop it from functioning efficiently.
The good news is that you can usually solve this issue by taking off the fob's key and using a the paper towel to cleanse it of any dirt or water that remains. When the fob is dry, you can then replace the battery and it will start functioning normally.
You can also take it to an auto repair shop or locksmith to have it professionally programmed and cleaned. These professionals will use special equipment to make sure that the key fob functions with the computer in your car.
If your Fiat 500's main fob isn't working, it can be frustrating and stressful. You might be tempted to visit a dealer to replace your key fob however this could be expensive and time-consuming. Locksmiths can handle every aspect of the replacement of your car's key fob without the requirement of a dealership trip. This is why they are a far better choice than an auto dealer.
Pairing Issues
If you drop your key fob or it stops working and nothing else seems to be going on this could be because of the chip that has gone awry. It could be due to water damage or a dead battery. it could just be that you need to reprogramme it.
Often times this can be done by following the steps in your owner's manual. If you are having trouble or your manual doesn't work, you should have an auto locksmith do this task. key fiat 500 will ensure that the chip isn't fried and will likely be the most affordable solution.
Another problem with some 500 owners is that the key fob won't secure the car. This could be an issue if you're driving to a gas station and want to fill up. Some owners have stated that their 500's locking system has failed and they've had to replace the entire intermediate steering shaft. This problem has actually been described in a technical support bulletin (TSB) from Fiat.
A reputable locksmith can help you if your Fiat has issues. They will duplicate your current key or create a brand new key that locks and starts the vehicle. They are able to do this without looking at your old key, and it's usually less expensive than buying a key from the dealer.